Talk:World Archives Project: California Railroad Employment Records, 1862-1950
- 1 Extra Keying Helps
- 2 Common Keying Errors Found by Reviewers
- 3 Questions and Answers
- 4 Keying Sample
Extra Keying Helps
Old 1860's Employment Records that show signatures
This 1864 file has signatures on some of the men on the right hand side of the document. It is acceptable to use a signature when a name on the left such as Wm is signed William. If it is signed by someone else, you may want to use the name on the left side. But the ones that are actually signed by the person should be correct, as they mostly know how to sign their names. Wiedwoman 23:05, 25 August 2010 (UTC)
Common Keying Errors Found by Reviewers
Please remember to:
- Replace "&" with the word "and".
- Key the occupations.
- Payroll period 1-15 is keyed as the 15. Please key only the last date of the two dates given.
- Please do not key periods after initials, abbreviations and in the occupation field.
Do not list the payroll examiners name listed at the bottom of the payroll forms. -- Wiedwoman 00:54, 11 April 2011 (UTC)
Payroll pages that are Receipts
These should be keyed as a payroll page.
Example of reviewed errors
Time and Payroll Sheet: Some pages contain two Time and Payroll Sheets, one on top and the other on the bottom of the screen. Often one or the other is being overlooked. Please scroll the full length of the screen so you won't miss any names.
Questions and Answers
If you have a keying question that is not answered on the project page or in any of the information above, click “EDIT” and ask it here. (If you click on Rich Editor you won't have to worry about formatting your entry.) Then click “WATCH” at the top right on this page and you will be notified via email when an update has been made.
General, Choice of Form Type, and What Records to Key and Not Key
Q: If names are listed under a section number, do we need to key in blank entries for that line so that the record numbers for names correspond in the image and in the entries or do we continue to key names as if the "SECTION #" line isn't present on the image?
- A: Do not key blank entries. Skip the section number lines. -- Wiedwoman 04:35, 10 June 2011 (UTC)
Q: If the additional record number does not match the row number in the image, should we key names in the order of the record numbers?
- A: No. Key names in the order that they appear on the page. -- Kateshort2 18:04, 3 July 2012 (UTC)
Q: On images like this do you want the duplicate lines keyed? On some images they will show a person on two lines with different occupations. I know those should be keyed if they show different occupations. But these are showing same occupations.
- A: From Anna: Key just once per page. We don’t need them multiple times." June 30, 2010 -- Wiedwoman 12:32, 17 May 2011 (UTC)
- But if there are duplicate names with a different payroll date, I think these should be keyed. -- Wiedwoman 21:57, 4 July 2012 (UTC)
Q: I have a form that says "Recapitulation" at the top. Then, in the name column, there are what appear to be the names of locations. Examples: Artesia, Brea, Compton, etc. There is nothing in the occupation column. How should I key it? -Sarah
- A: Unlike the previous version of this project, there is no header to key, so if there are no actual names to key on a page (such as for a page of business names, section names, or locations), change the form type to "Cover Page, Section Header, etc." -- Kateshort2 18:04, 3 July 2012 (UTC)
Q: I was reading when there are blank lines between information we are to ignore those? An example would be when there is a title on the first line before the names and occupations occur. I just want to confirm that this is correct. Unless I am missing something, I have reread the instructions for this project and cannot find anywhere where this is discussed.
- A: Ignore blank lines, but use the occupations for the lines following it. -- Wiedwoman 23:59, 16 August 2010 (UTC)
Q: If a red line is drawn through someone's name are they to be entered?
- A: If a name is crossed out and not replaced we are to key the name. This is in the general keying guidelines. -- Wiedwoman 23:59, 16 August 2010 (UTC)
Q: How do you key payroll pages that include businesses, list of deductions, and recapitulation?
- A: Do not key business names. Classify as a "Cover page, Section Header, etc." -- Kateshort2 18:04, 3 July 2012 (UTC)
Q: The data sets that I have been entering are two sheets for one data page. They are arranged on the screen one above the other. So far, they have all been the same so entering data was no problem. I have run into a page where the two sheets would be classified as different form types. The top portion is "Cover Page, Section Header, etc." but the bottom section has names to be keyed. Do I just ignore the top portion and key it in as if there were names on both parts?
A: Key this page as a Name and Date form. --Paulmd199 06:11, 7 July 2012 (UTC)
Q: On a payroll sheet, I have several employees listed as "furloughed for war service" each with different dates, no occupations. Do I key them?
- A: Yes, they should be keyed. Is there a date at the top of the page? If so, use that date. -- Wiedwoman 20:59, 6 August 2012 (UTC)
Q: How do I key a payroll day that is listed on the document as "1st Period"?
- A: Day will be left blank. -- Wiedwoman 00:24, 29 July 2011 (UTC)
Q: Instead of a day some of the payrolls I'm seeing have 'second period' stamped over the '.... to ....' slots at the top of the page. Should we be leaving the day field blank or entering the last day of the relevant month (e.g. 31 if it's July)? Haven't seen any 'first period' ones yet but in this case would it be 'blank' or '15' we should enter??
- A: If there is no day listed it should be left blank. -- Wiedwoman 14:20, 21 September 2011 (UTC)
Q: On Supplementary Rolls for adjusted wages, the record date is listed as: "for the period May and June 1916 inclusive, during the month of April 1918." Which month and year are keyed?
- A: Use April 1918 as the date. -- Wiedwoman 00:51, 19 July 2012 (UTC)
Q: Surname problem: in the surname column is only a number preceeded by a pound sign. How should this be keyed?
- A: You would key as first name only with surname blank. Such as "S N #39" would be keyed: Given: S N 39 and Surname: Blank. We haven't figured out what these numbers stand for. Maybe a Chinese that had no name or maybe a section number where they worked? --Wiedwoman 23:53, 16 August 2010 (UTC)
Q: If there is a record number after each name, should we key that as a suffix?
- A: No. Don't key the record numbers that sometimes appear at the end of each name. -- Kateshort2 18:04, 3 July 2012 (UTC)
Q: On an image the first half of the pay period has R Werderman and the second half of the pay period has Robt Werderman. These are on the same page. Should I key them as 2 separate records or key as Robt Werderman?
- A: Since it's possible these could be two different people, key both. -- Kateshort2 18:04, 3 July 2012 (UTC)
Q: Names column has Chinese names, Occupation column has English names--no occupation listed. How do I key this record? Just the Chinese names, then continue with the English names, or ignore the English names?
- A: These are 1860's era forms. We should probably key the Chinese names and then continue with the English names (revised answer). I think the English names are their supervisors. Remember not to key company names. -- Wiedwoman 12:38, 17 May 2011 (UTC)
Q: Given name is "Robt." and I would assume that is short for Robert, do I put abbreviated name or Robert?
- A: Key as Robt. Do not expand names (or occupations). -- Wiedwoman 18:43, 31 August 2011 (UTC)
Q: I have come across a writer who has W, next to it is a " and above the ditto is a small letter n. What does this mean?
- A: Are you saying given name is W"n? Key as Wn. Could be Washington, but key as seen. -- Wiedwoman 14:31, 1 September 2011 (UTC)
Q: At the top of some of the payroll pages it gives the name of a supervisor. The one I'm looking at now reads, "For Services rendered in the M. of W. Department, under the direction of W. F. TURNER DIVISION ENGINEER." Turner's name and occupation are stamped in red. Should I key him as well as the employees listed below with pay details?
- A: We do not key names that are in the upper section, nor at the bottom of the payroll sheet. -- Wiedwoman 14:39, 20 September 2011 (UTC)
Q: I'm confused. Instructions say not to use symbol ' when transcribing, but in keying sample you use it for O'Connor? In what way to we not use ' ?
- A: ' can be used on surnames. They are not used for given, such as Sam'l would be keyed as Saml. We do not use any punctuation in the occupations.
-- Wiedwoman 18:19, 6 August 2012 (UTC)
Q: I just came across an occupation that is listed as "Yd Engr" yet the drop down list only had expanded occupations.
- A: Key the occupation as seen. F7 to accept. -- Wiedwoman 17:57, 12 July 2011 (UTC)
- However, note the exceptions to the "key as seen" rule in the Occupations section of the main wiki page for this project. -- Kateshort2 18:04, 3 July 2012 (UTC)
Q: I am probably am getting counted down for not typing Do but, to me, DO and DO DO mean ditto. If we're not to type the " marks and instead repeat the last occupation, isn't it correct to do the same when DO or DO DO is used?
- A: Do and Do Do would mean that you would key the same information as the line above. So if the occupation of line 1 was laborer and line 2 had "do", you would enter laborer for line 2 and so on.
Q: How should records where there are odd entries in the occupation field, like location, be keyed?
- A: Per Anna - I would leave the occupation field blank. -- Wiedwoman 00:10, 5 January 2011 (UTC)
Q: Do we include the numbers preceding the actual job? i.e. 7 Trkwalker -- 09:06, 19 January 2011 (UTC)
- A: No -- Wiedwoman 16:14, 18 January 2011 (UTC)
Q: Do we key the word "overtime" in the occupation or it that just the payrate?
- A: No -- Wiedwoman
Q: Do we key the word "do" in the occupation field or copy the occupation from previous record?
- A: No, key the occupation from the occupation from the previous record (F3) -- Wiedwoman 23:28, 20 June 2011 (UTC)
Q: If the occupation is listed as "Sec Stkpr Sec 1 2 4", do we key the entire entry or just Sec Stkpr?
- A: I would only key Sec Stkpr. -- Wiedwoman 15:42, 3 August 2011 (UTC)
Q: I have a document where there are no occupations listed. But above the first name on the list, in the occupation column, it says "Trainman". There are no ", or do in the following occupation fields. Do I just leave the occupation blank for everyone?
- A: If is it showing in the occupation column, I would key all the persons as trainman. -- Wiedwoman 17:54, 9 September 2011 (UTC)
Q: How do we key 2 occupations for the same person if there is no & present? How do you know that there are 2 different occupations?
- A: If it were listed as Clerk and then Typist under it, it would be keyed: Clerk Typist. -- Wiedwoman 17:52, 9 September 2011 (UTC)
Q: The payroll image I'm working on states in the header that the occupation for the employees listed is "Conductors". Should I key in "Conductors", "Conductor", or leave the field blank in the occupation field of the employees?
Q: I understand that if an individual has two occupations that we are to simply put "and" between them.
- A: Do not add the word And unless it (or &) is specifically listed in the occupation -- Wiedwoman 23:01, 12 April 2011 (UTC)
Q: One individual had 3 occupations, two of them were 3rd and 4th Operator. The occupation box would not allow two numbers. What would you advise here? Do we input the name twice and put the two numbered occupations as separate entries OR simply delete one of the numbered occupations?
- A: Use the F12 key to allow typing of numbers into the line at the top of the box and then click "ok". Key multiple occupations on one line. -- Wiedwoman 12:52, 17 May 2011 (UTC)
Q: The paylist I'm working on shows the occupation for the first name while all subsequent names have ditto marks for the occupation--EXCEPT a name in the middle of the page which has the digit 2 for the occupation. I've verified that typewriters of that period had ditto marks as the shift character for the number 2, so the 2 is very likely an error. How should I enter the occupation for the name that has the 2; and all folllowing names that still show ditto marks for the occupation?
- A: Key as if it was a ditto. -- Wiedwoman 14:45, 9 June 2011 (UTC)
Q: I am keying a set of images where the first individual on each of the first four pages is identified as conductor. Obviously I would enter conductor for him. However, for the rest of the page there are no " or do or any other type of mark listed - it is just blank. In the page heading though, it says "For services rendered...by Trainmen..." On the fifth page of the set (same page heading as the previous four), the first person is identified as motorman, farther down someone is a Cond. & Mot., next person is Motorman, etc. Is this record telling me that we have four pages of conductors and mostly motormen on the fifth page, or do I enter "trainmen" for the occupation for each of the men whose occupation is blank? I am thinking trainmen, but am I correct?
- A: We don't know for sure if the other persons on the page are conductors, trainmen, etc. I would leave the other lines blank. I've been accepting them when they do key them as the same, but I would leave them blank. -- 06:45, 4 August 2012 (UTC)
Class of Service
Q: I am working on a Payroll Record that has a column "Class of Service (See Note)". The note says: "Indicate Class of Service by using one of the following symbols: F = Freight P = Passenger L = Local H = Helper M = Mixed W = Work S = Switch D = Deadhead B = Back-up CR = Coal Run". This payroll record does not have an occupation column. Is this the occupation? If it is do I input the codes shown for the payee such as F P and W? Or do I input as Freight Passenger and Work?
In reviewing I've come across a list of names of employees fired for various causes i.e. 'drunk on duty', along with the dates of termination, occupation, etc. Should this have been keyed at all since it's not payroll? If it should have been keyed would it be 'name only' or 'name and date' form?
- A: There are many of these lists where employees were fired. They would be classified as name and date form. -- Wiedwoman 17:36, 4 July 2012 (UTC)
Name and Date
|Record Date Day||Record Date Month||Record Date Year||Prefix||Given||Surname||Suffix||Occupation|